Gamepad Tester – Free Online Controller Tests

Check every button, stick, trigger and vibration motor on your Xbox, PlayStation, Nintendo or PC controller. Free, no download, real-time results in your browser.

Professional Gamepad Tester

Xbox 360 Controller

XInput STANDARD GAMEPAD

Mapping: standard Timestamp: 0.0000

Button States

Buttons History

Vibration Test

LB
RB
LT
RT
View
Menu
L3
R3
Y
B
A
X
0% 0%
Left Stick
AXIS 0 (X)
0.00000
AXIS 1 (Y)
0.00000
0% 0%
Right Stick
AXIS 2 (X)
0.00000
AXIS 3 (Y)
0.00000
Connect your controller by USB or Bluetooth, then press any button to start. Nothing is uploaded or stored.

Introduction

This free online gamepad tester checks your controller in real time. It shows which buttons register, how far each stick moves, whether a stick rests at center, and whether the vibration motors work. It supports Xbox, PlayStation, Nintendo Switch and generic controllers, and you can test up to four at once.

Connect your controller by USB or Bluetooth, press any button, and the results appear straight away. There is nothing to install and no account to create. If you are chasing a drifting stick, an unresponsive button or weak rumble, this page will show you what is wrong.

How It Works

Simple 3-step process to test your controller.

Gamepad Tester

Connect

Plug your controller in with a USB cable or pair it over Bluetooth.

Gamepad Tester

Run

Press any button. Browsers only detect a controller after it sends input, so this wakes it up.

gamepad tester

Analyse Result

Press every button, move both sticks through their full range, squeeze the triggers and run the vibration test.

Why Use This Gamepad Tester?

The tool reads your controller through your browser’s standard Gamepad API, so what you see on screen is the input your browser actually receives. It is made for players, streamers and repair technicians who need a quick, dependable check.

gamepad tester

Fast, Online & Free to Use

Open the page in Chrome, Edge or Firefox and test right away.

gamepad tester

No Installation Required

There is no software to download.

Multi-Controller Support

Connect up to four controllers and compare them side by side.

What This Controller Tester Checks

gamepad tester

Button Response Test

Every face button, bumper, trigger, D-pad direction and stick click lights up as you press it. If a button does not light up, or lights up only some of the time, it is worn, dirty or faulty.

Joystick & Stick Drift Test

A live view shows direction, range and center position for both sticks. Leave the sticks untouched and watch the values: a healthy stick rests very close to 0.00 on both axes. A stick that sits away from zero, or keeps moving by itself, has drift. Use the Stick Drift page for a more detailed check.

gamepad tester

Vibration & Rumble Check

Start the vibration test to check that the rumble motors respond. Turn on Infinite Vibration to keep the controller vibrating until you switch it off, which helps you feel weak or uneven motors.

Supported Controllers

This gamepad tester works with more than 20 controller models. Select your controller family for a dedicated test page and connection tips.

xbox input test

XBOX Controllers

Xbox 360, Xbox One, Xbox Series X|S and Xbox Elite Series controllers.

gamepad tester

Playstation Controllers

DualSense (PS5), DualShock 4 (PS4) and DualShock 3 (PS3) controllers.

nintendo controllers

Nintendo Controllers

Switch Pro Controller, Joy-Con, Switch Online controllers and Nintendo classic controllers.

generic third party

Generic & Third Party

XInput controllers, DirectInput controllers and Bluetooth gamepads.

Browser Compatibility

BrowserWorks?Notes
Chrome✅ YesBest experience, full Gamepad API support
Edge✅ YesBest experience, full Gamepad API support
Firefox✅ YesWorks, update to the latest version
Safari✅ YesWorks on macOS
Mobile browsers⚠️ PartialMay connect, desktop is recommended
Internet Explorer❌ NoNot supported, use Chrome or Edge

Controller Not Detected? Troubleshooting Guide

  • Wake the controller. Press any button after connecting. Browsers only show a controller once it sends input.
  • Check the connection. Check the cable or Bluetooth pairing, then try a different USB port.
  • Refresh or switch browser. Refresh the page, or open the site in Chrome, Edge or Firefox.
  • Close other apps. Apps such as Steam can take control of a controller. Close them and retest.
  • Button not responding. A button that never registers may have a hardware fault or dirt under the button.
  • Input delay. A weak Bluetooth signal or heavy background apps can add input delay. Move closer or use a cable.
  • Vibration not starting. Make sure your controller supports vibration and is connected properly.

How to Check Stick Range and Dead Zones

Move each analog stick slowly from the center to the edge in a full circle. Watch the live values: the stick should reach close to ±1.00 in every direction, and the reading should change smoothly. If movement near the center does nothing, or the stick stops short of full range, you may have a dead zone or a worn stick.

Test the triggers the same way: press them slowly from fully released to fully pressed and check that the value rises smoothly.

  • Keep it clean. Clean around buttons and sticks gently with a soft cloth or small brush.
  • Charge first. Charge wireless controllers fully before testing, since low battery can affect readings.

When to Repair or Replace Your Controller

If cleaning and reconnecting do not fix the problem, the test results tell you what to do next.

  • Confirmed stick drift: Consistent drift on a clean stick usually means a worn stick module. Check your warranty, or consider a repair or replacement.
  • Unresponsive buttons: Dirt can be cleaned. A button that stays dead after cleaning usually needs a new contact or button board.
  • No or weak vibration: Test on another device or browser first. If it still fails, the motor or connector may be faulty.

For step-by-step help, see our Guides.

Frequently Asked Questions

No downloads required! Our gamepad tester works in your web browser. Connect your controller and start testing immediately.

Yes. Everything runs client-side, so Gamepad Tester never uploads controller data or personal information.

We support 20+ controller types, including Xbox, PlayStation controllers, Nintendo Switch, and generic USB/Bluetooth controllers. Most modern gaming controllers work perfectly.

Chrome, Firefox, and Edge all work excellently. For the best experience, use the latest version of your preferred browser.

Slowly rotate each joystick and observe the axis centre in Gamepad Tester. If the stick does not return precisely to the centre position when released, it may indicate stick drift. In such cases, the controller may require recalibration or, in some instances, replacement of the internal potentiometer.

Try refreshing the page, checking your USB connection, or ensuring Bluetooth is properly paired. Some browsers require permission to access gamepads.

Connect your controller, press any button, then run the Vibration Test on this page. Turn on Infinite Vibration to keep it rumbling until you switch it off — that makes a weak or uneven motor easy to feel. If one side vibrates and the other does not, the motor or its connection may be faulty.

Yes. It works with Xbox One, Xbox Series X, Series S, Xbox Elite and Xbox 360 controllers, with no download. For a dedicated Xbox test, use the Xbox Controller Test page.